A. Purpose:

1. Using multi head wire drawing, copper wire parallel wire laying, and coiling machine for active wire laying, or using rewinding, rewinding, and extrusion production for easy operation, it is a single disc wire laying equipment with constant tension and no torsion.

B. Main technical parameters:

1. Suitable wire type: suitable for copper wire, insulated core wire harness stranding or cable stranding, etc.

2. Applicable wire diameter: Φ 0.08-0.5mm multiple parallel copper wires,

3. Maximum line speed: 0-100m/min. The release speed is synchronized with the host

4. Number of wire ends: According to customer requirements.

C. Main accessory brands:

1. Bearings: Japan NSK, Japan KOYO.

D. Main components and performance of the equipment:

1. Applicable wire diameter: Φ 0.08-0.5mm, the rack is made of high-quality profile steel, which is sturdy and beautiful;

2. Active pay-off, suitable for spool specifications: 630mm

3. Shaftless active pay-off, equipped with 2.2KW Taiwan Shengbang reduction motor and Hipmount frequency converter.

4. The frequency converter controls the tension of the payline and automatically adjusts it. When the take-up speed slows down, the frequency converter controls the speed of the main machine. At the same time, the displacement sensor reaches the lowest position, and the payline resistance of the payline reel increases with the brake.

5. Control: All electrical components are imported. It is equipped with Ammeter, start and stop control devices, which can automatically track the speed of the take-up host, link with the take-up machine for control, and automatically stop when the wire is broken. The electrical installation plate is made of insulating materials.

6. Tension controller:

a. The rack is made of high-quality profile steel and welded steel plates, which is sturdy and beautiful.

b. Using a swing arm to control the release speed of the release motor, a cylinder is installed on the swing rod, and the pressure of the cylinder can be adjusted through a pressure regulating valve to change the release tension.

c. Automatically track the take-up speed of the stranding machine to maintain a constant payout speed and tension.

7. Wire reel lifting: Use a hydraulic forklift (provided by the customer) to manually load and unload the wire reel

8. Machine direction: Person facing the machine, wire laying on the left, and wire winding on the main machine of the stranding machine on the right

9. Machine color: Apple green, (same as existing equipment)